montena technology sa
Route de Montena 89
1728 Rossens
Switzerland
Tel. +41 26 411 84 84
Fax +41 26 411 17 79

products(at)montena.com

MIL-STD-461 CS101, RS101

MIL-STD-461 CS101 specifies the conducted susceptibility test of equipment and subsystem AC and DC input power leads, in the frequency range of 30 Hz to 150 kHz.

MIL-STD-461 RS101 is used to assess the radiated susceptibility of equipment and subsystem enclosures, including electrical cable interfaces, in the frequency range of 30 Hz to 100 kHz.

Montena offers a complete test solution for both standards. Dedicated control software with a graphical user interface allows simple setup via scroll down menus to select the appropriate components. Calibration and measurement are designed to be fully automated, with reports generated afterwards.

Advantages

  • Automatic calibration for the full test frequency range
  • Automatic configuration of the measurement equipment setting
  • Scroll-down menus for selecting test equipment and components
  • Frequency sweeping
  • Test and calibration reports automatically generated

Specifications

  EQUIPMENT REFERENCE SPECIFICATIONS
Frequency injection Signal generator SIG10M 0 to 10 MHz
Power amplifier PA20K13A 0 to 300 kHz frequency range
Coupling transformers TR250K50A 50 A, for CS101
Radiating loop SG12-RS101 30 Hz to 100 kHz, 15 A continuous for RS 101
Test accessories High power load VR15-210 Variable resistor to compensate the power current feedback into the amplifier
Precision resistor R0.5-200 0.5 Ω 200 W, resistor for calibration
LISN LISN50-25 Line impedance stabilization network 50 µH, 20 A
Field monitoring sensor SCR4-RS101 Single coil for calibration
Measurement equipment Current probe CT10000F 50 A, 1 Hz to 20 MHz
Oscilloscope OD2C100M 100 MHz bandwidth, 1 Gs/s, 2 channels
Software   Management of calibration, settings, tests and reports