Links EN / FR

MIL-STD Conducted Susceptibility generators

Montena develops and manufactures pulse generators for MIL standards conducted susceptibility tests, according to MIL-STD-461 CS106, CS114, CS115 and CS116 test methods.

For better frequency range coverage, montena CS116 generator is proposed in 3 versions with respectively 6, 9 and 17 test frequencies.

The MIL-STD-1275E "Characteristics of 28 volt DC electrical systems in military vehicles" is also covered by a generator, the PG1275E, that is now proposed with a dedicated automation software that assists the operator in the measurement of the spikes and surge test parameters, including automatic monitoring of the energy.

Advantages

• Control software for fully automated test setup and measurement
• CS116 generator with up to 17 test freq. for a more accurate susceptibility assessment
• One single output for all CS116 test frequencies and optional CS114, CS115
• Complete set of accessories for test and measurement
• All generators can be ordered such as table top or 19” rack mounting versions

All designs can be adapted to the customer’s requirements, to fulfil other standards.

Specifications

The following standalone generators are proposed :

REFERENCE	SPECIFICATIONS	STANDARDS
PG-CS106	500 V / 100 A	MIL-STD-461 F CS106
PG-CS115	0 – 2 kV	MIL-STD-461 D/E/F/G CS115
POG-CS116-6	10, 100 kHz, 1, 10, 30, 100 MHz	MIL-STD-461 CS116, 6 frequencies
POG-CS116-9	10, 30, 100, 300 kHz, 1, 3, 10, 30, 100 MHz	MIL-STD-461 CS116, 9 frequencies
POG-CS116-17	10, 18, 30, 56, 100, 180, 300, 560 kHz 1, 1.8, 3, 5.6, 10, 18, 30, 56, 100 MHz	MIL-STD-461 CS116, 17 frequencies
PG-C202	10 kHz to 100 MHz, up to 23 A on a 100 ohm load	MIL-STD-461 CS116 levels +7dB, 6 to 12 frequencies
PG1275E	16 A / 400 A	MIL-STD-1275E Injected voltage spikes and surges
DM400	400 A external diode module	MIL-STD-1275E Injected voltage surges

Montena has designed the POG-CS116 pulse generator to host additional pulse modules for CS106, CS115 pulse delivery beside the built-in CS116 damped sinusoidal pulse modules. These factory installed modules and the CS116 modules are all connected to the same generator output. This allows the execution of all test frequencies and pulse shapes without re-cabling or module exchange need.

The calibration as well as the measurement process is entirely automated. All settings and levels are recorded for measurement and test reports.

The POG-CS116 generator can host following additional modules:

REFERENCE	CHARGING VOLTAGE	REMARKS
M-CS106	500 V / 100 A	Module CS106 to be plugged in the POG-CS chassis
M-CS115	0 – 2 kV	Module CS115 to be plugged in the POG-CS chassis