Links EN / FR

MIL-STD-461 CS101, CS109, RS101

CS101 specifies the conducted susceptibility test of equipment and subsystem AC and DC input power leads, in the frequency range of 30 Hz to 150 kHz.

CS109 conducted susceptibility test, Structure Current, 60 Hz to 100 kHz, is used to verify the ability of sensitive equipment and subsystems (1uV or better) to withstand structure currents.

RS101 is used to assess the radiated susceptibility of equipment and subsystem enclosures, including electrical cable interfaces, in the frequency range of 30 Hz to 100 kHz.

Montena offers a complete test solution for the three standards. Dedicated control software with a graphical user interface allows simple setup via scroll down menus to select the appropriate components. Calibration and measurement are designed to be fully automated, with reports generated afterwards.

Advantages

• Automatic calibration for the full test frequency range
• Automatic configuration of the measurement equipment setting
• Scroll-down menus for selecting test equipment and components
• Frequency sweeping
• Test and calibration reports automatically generated

	EQUIPMENT	REFERENCE	SPECIFICATIONS
Frequency injection	Signal generator	SIG10M	0 to 10 MHz
	Power amplifier	PA20K13A	0 to 200 kHz frequency range
	Coupling transformers	TR250K50A	50 A, for CS101
	Radiating loop	SG12-RS101	30 Hz to 100 kHz, 15 A continuous for RS 101
Test accessories	High power load	VR15-210	Variable resistor to compensate the power current feedback into the amplifier
	Precision resistor	R0.5-200	0.5 Ω 200 W, resistor for calibration
	LISN	LISN50-25	Line impedance stabilization network 50 µH, 20 A
	Decoupling capacitor	CC10-400	Decoupling capacitor 10 µF
	Field monitoring sensor	SCR4-RS101	Single coil for calibration
Measurement equipment	Current probe	CT10000F	50 A, 1 Hz to 20 MHz
	Oscilloscope	OD2C100M	100 MHz bandwidth, 1 Gs/s, 2 channels
	Software		Management of calibration, settings, tests and reports