montena technology sa
Route de Montena 89
1728 Rossens
Switzerland
Tel. +41 26 411 84 84
Fax +41 26 411 17 79
These couplers are intended for the injection of pulsed or CW current without interrupting the cable bundle to test. They are particularly suitable for current injection tests to NEMP pulses (PCI) according to the standard MIL-STD-188-125-1/2 (short pulse).
REFERENCE | MAX CURRENT | MAX VOLTAGE | NUMBER OF LINES | REMARKS |
CC-E1-1200-1 | 1.2 kA peak | 80 kV | 1 line | Capacitive coupler for PPG-E1-1200 generator designed for MIL-STD-188-125, short pulse |
CC-E1-1200-4 | 4 lines | Capacitive coupler for PPG-E1-1200 generator designed for MIL-STD-188-125, short pulse | ||
IC-E1-1200 | Bundle Ø 40 mm max | Inductive coupler for PPG-E1-1200 generator, for common mode injection of MIL-STD-188-125, short pulse | ||
IC-E1-2150 | 2.15 kA peak | Bundle Ø 30 mm max | Special inductive coupler for PPG-E1-1200 generator | |
CCL2500 | 5 kA peak | 80 kV | 1 line | Capacitive coupler designed for MIL-STD-188-125, short pulse |
DS3 | 4 lines, signals | Decoupling box designed for MIL-STD-188-125, short pulse | ||
DL3 | 2 lines, mains | Decoupling box designed for MIL-STD-188-125, short pulse | ||
IC3B | Bundle Ø 63 mm max | Inductive coupler for common mode injection of MIL-STD-188-125, short pulse | ||
IPDR250 | 100 W permanent / 500 W 15 min. | Bundle Ø 44 mm max | Injection probe for MIL-STD 461 CS114, CS115 or CS116 tests | |
CJDR250 | Calibration jig for injection probe IPDR250 | |||
IC10M | 100 A | 600 V | Bundle 34 x 43 mm max | Injection probe for MIL-STD 461 CS106 or RTCA DO160 section 17 |